Visit us on the Cranchi Düsseldorf Boat Show stand A21 in Hall 6 19-27 January 2019

BOAT SPECIFICATION

Walker Custom Cruiser Barge

Boat Name Dream Catcher   Year 2009   Location Worcester, United Kingdom    Price £295,000 inc Vat
Number of engines 1  Make/model Single Vetus Deutz DT66  Fuel Diesel  Engine hours
Dimensions – LOA: 18.29m  Beam: 4.11m  Bridge Clearance: 2.74m

Interior : Entering from the sliding side doors to inner helm with seating for crew, going forward and down steps in to spacious galley with LPG s/s four burner hob and oven, s/s inset sink, fridge, washing machine, ample cupboard space, going forward into the Lounge with large fitted U shaped settee and removable dinning table that coverts to a double berth, storage cupboards and shelves. The forward cabin has an en suite shower room, walk round double berth, wardrobe and storage cupboards. Returning to the inner helm and down steps to the rear master cabin with ensuite shower room, wardrobe and storage cupboards. Return to inner helm and up steps to the Flybridge with spacious deck area for relaxing and socialising. This deck has a part or fully removable canopy.
Comments : Immaculately presented, "Dream Catcher" was a Show Boat by Walker Boats. She has distinctive and unique lines based on the classic shape of the Dutch Barge. This boat has a fixed steel wheelhouse yet an air draft of only 2.75 meters. Strongly built from welded steel she is finished to the highest standards using the finest quality materials with comfort and safety in mind. She has a flybridge utilising aft deck space for open air seating and a second helm position. Built to RCD Cat C. 

+44 (0)1684 593111 | oliver.wylie@tingdene.net
Download summary
Download full specification
FULL SPECIFICATION

Year

2009

Dimensions

LOA: 18.29
Beam: 4.11
Minimum Draft: 1.01
Displacement: 77162
Bridge Clearance: 2.74

Engines

Total Power: 170
Total Engines: 1
Engine Power: 170

Tanks

Fresh Water Tanks: 1(1800)
Fuel Tanks: 1(1400)
Holding Tanks: 1(900)

Accommodations

Number of double berths: 3
Number of cabins: 2
Number of heads: 2
Number of bathrooms: 2

Features

Generator
Battery charger
Electric bilge pump
Tv set
Oven
Gps
Heating
Cockpit table
Hot water
Cockpit cover
Bow thruster
Plotter
Shore power inlet
Vhf
Repeater
Microwave oven
Inverter
Refrigerator
Electric head
Washing machine

DIMENSIONS
Max Bridge Clearance: 2.75
ENGINES

Total Power: 170hp

Gallons per hour 2 gals/9ltrs

TANKS
Fuel: Diesel 308 gallons
ACCOMMODATIONS

Entering from the sliding side doors to inner helm with seating for crew, going forward and down steps in to spacious galley with LPG s/s four burner hob and oven, s/s inset sink, fridge, washing machine, ample cupboard space, going forward into the Lounge with large fitted U shaped settee and removable dinning table that coverts to a double berth, storage cupboards and shelves. The forward cabin has an en suite shower room, walk round double berth, wardrobe and storage cupboards. Returning to the inner helm and down steps to the rear master cabin with ensuite shower room, wardrobe and storage cupboards. Return to inner helm and up steps to the Flybridge with spacious deck area for relaxing and socialising. This deck has a part or fully removable canopy.

GALLEY

A spacious galley with stainless steel four burner hob and electric oven, stainless steel inset sink, fridge, washing machine, and a vast amount of cupboard space

ELECTRONICS

24/4000-120 Mass Combi Inverter Charger. 10Kva 1500 rpm Mastervolt silent run generator. Electric switch panel, 24v electrical switch for batteries, 220v shorepower, 220v in cabins, saloon and galley. 1500 vertical electrical windlass. 180kg bowthruster. Certified Navigation lights. Batteries for engine 800amp hours. 3 electric bilge pumps Primary DC fuse board. Masterswitch and 6 auto AC source selector. Master Link MICC + full battery monitor. Galvanic Isolator /transformer. 1 water pump, 2 grey water pumps, 2 black water waste pumps.

FLYBRIDGE

The flybridge has teak decking with wide teak steps, windsheild in steel, steering wheel consul with integrated control panel, rev counter and alarms, fuel guages, navigation instruments, hydraulic steering system, up and down anchor winch control unit, bow thruster control unit and compass. The deck has stainless steel handrail with solid timber hand rail capping, a sunshade cover, 2 storage lockers and room for a lift raft. The flybridge is self draining.

ADDITIONAL

This boat has been built to RCD Category C. The hull was designed by Andrew Wolstenholme.

 

In October 2018 the boat was completely redecked with a non-slip synthetic teak finish.  See pictures.

TINGDENE BOAT SALES DISCLAIMER

Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed.  The particulars are intended  only as a guide and they do not constitute a term of any contract.  A prospective buyer is strongly advised to check the particulars and where appropriate to have the vessel fully surveyed and inspected,river trialled and tested.

DISCLAIMER

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.